MONORAIL rail BM S
- Excellent dynamic properties and many commercial benefits
- Available as standard norm rail (N)
- Buildsizes BM 15 - BM 45
- Individual configurable rail lenghts
- All accuracy classes available
- Straightness KC
- Non coated
- Screwable from above
- Trapezoidal rail profile
MONORAIL rail MR S
- High rigidity, great dynamic and static load carrying capacity
- Available as standard norm rail (N)
- Buildsizes MR 25 - MR 65
- Individual configurable rail lenghts
- All accuracy classes available
- Straightness KC
- Non coated
- Screwable from above
- O-geometry to achieve a uniform and high absorption of forces
MINIRAIL rail
- Stainless steel, through-hardened
- Process reliability thanks to superior design
- Low risk of contamination thanks to tight clearance between the carriage and guideway
- Precise, robust, strength
- The range includes the standard rail widths of 5, 7, 9, 12 and 15 as well as wider widths of 14, 18, 24 and 42.
- Available in two accuracy classes (G1 and G3)
- Configurable rail lengths
- Gothic arc profile of the guideway tracks allows high load capacities
MONORAIL carriage BM W
- 4-row ball bearing guide in O-arrangement
- Smooth, even running behavior due to minimal friction
- Variety of lubrication options
- Maximum speed 5 m/s
- Maximum acceleration 100 m/s²
- Applicable at a working temperature from -40°C to + 80°C
- Can be used in industrial applications with high demands on speed, reliability and consistency of running characteristics
MONORAIL carriage MR W
- High rigidity due to rollers with logarithmic profile as rolling elements
- Large dynamic and static load-bearing capacity
- Very smooth running
- Variety of lubrication options
- Maximum speed 3 m/s
- Maximum acceleration 50 m/s²
- Can be used at a working temperature of -40°C to + 80°C
- Construction condition 4S
MINIRAIL carriage
- Process reliability thanks to superior design
- Speeds up to 5 m/s and acceleration up to 300 m/s2
- The precisely finished carriages can be interchanged as desired
- Low risk of contamination thanks to tight clearance between the carriage and guideway
- Low travel pulsation thanks to optimally shaped ball recirculation
- Vacuum-compatible down to 10-7 mbar
- Temperature range -40 °C to + 80°C
- Available in four lengths: MNNS (short), MNN (standard), MNNL (long) and MNNXL (extra long)
MINIRAIL Lube-S carriage
- Long-life lubrication LUBE-S (LS): Reduces maintenance needs with continuous lubrication
- High precision: Ideal for accurate and low-friction linear movements
- Durability: Extends the lifespan of guide systems
- Flexible applications: Suitable for various industrial uses.
- SCHNEEBERGER quality: Reliable solutions for demanding manufacturing processes
Plastic plugs
- Can be fitted manually with fairly simple tools
- Recommended for use with protected axes or in environments with low levels of contamination, e.g. handling
- Accessory MONORAIL BM
- Quantity supplied: Pack of 25 pcs
Additional wiper Viton®
- Made of Viton® (fluoroelastomer)
- Suitable for use with aggressive coolants
- Retrofitting is possible without any need to remove the carriage from the rail
- Can be used in combination with ABM metal wipers
- Accessory MONORAIL BM
Metal wiper
- Used to protect the sealing lips of carriages and additional wipers against hot Metal chips
- Large and loose dirt particles are pushed away
- Ideally Used in combination with ZBV additional wipers
- Accessory MONORAIL BM
Lubrication plate
- Long lubrication intervals of up to 5,000 km or 12 months according to use
- Refill apertures closed with screws
- Reduced outlay on lubrication and accessories
- Low environmental impact thanks to minimum consumption of lubricant
- Wipers have a long service life as oil is also supplied to the top surface of the rail
- The Lubrication plates have the same dimensions as the carriages front plates
- Used in dry and clean environments i.e. on the ancillary axes of machine tools
- Accessory MONORAIL BM
Assembly rail
- Advise: Leave the assembly rail in the carriage to protect the balls against contamination
- the two internal carriage attaching screws Can be fitted and tightened through the two holes in the assembly rail
- Accessory MONORAIL BM
Plastic plugs
- Can be fitted manually with fairly simple tools
- Recommended for use with protected axes or in environments with low levels of contamination, e.g. handling
- Accessory MONORAIL MR
- Quantity supplied: Pack of 25 pcs
Brass plugs
- a hydraulic MWH fitting tool is Recommended for correct installation
- Accessory MONORAIL MR
Steel plugs
- two-part steel plugs suitable for applications with greater demands on the mechanical stability of rail surfaces, e.g. when mechanical loads are higher or in open chip spaces
- Combine the advantages of simple and Very Precise installation and a High degree of mechanical stability
- Accessory MONORAIL MR
Additional wiper Viton®
- Made of Viton® (fluoroelastomer)
- Suitable for use with aggressive coolants
- Retrofitting is possible without the need to remove the carriage from the rail
- Can be used in combination with ASM metal wipers
- Accessory MONORAIL MR
Metal wiper
- Used when large, loose particles of dirt on the guideway need to be removed
- The radial gap between the wiper and guideway is narrower than in the MR-4S front panel and is therefore designed in such a way that the particles cannot get stuck
- Effective when combined with additional ZCV wipers
- Accessory MONORAIL MR
Assembly rail
- Advise: Leave the assembly rail in the carriage to protect the balls against contamination
- The two internal carriage attaching screws can be fitted and tightened through the two holes in the assembly rail
- Accessory MONORAIL MR
Lubrication plate
- Long lubrication intervals of up to 5,000 km or 12 months according to use
- Refill apertures closed with screws
- Reduced outlay on lubrication and accessories
- Low environmental impact thanks to minimum consumption of lubricant
- Wipers have a long service life as oil is also supplied to the top surface of the rail
- The Lubrication plates have the same dimensions as the carriages front plates
- Used in dry and clean environments i.e. on the ancillary axes of machine tools
SN3-T
Flush type grease nipple M3
suitable for size BM 15, BM 20*, BM 25*, BM 30* and MR 25*
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.
SN6
Hydraulic-type grease nipple straight
suitable for size BM 20*, BM 25*, BM 30*, BM 35, BM 45, MR 25*, MR 30 to MR 65
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.
SN6-45
Hydraulic-type grease nipple 45°
suitable for size BM 20*, BM 25*, BM 30*, BM 35, BM 45, MR 25*, MR 30 to MR 65
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.
SN6-T
Flush type grease nipple M6
suitable for size BM 20*, BM 25*, BM 30*, BM 35, BM 45, MR 25*, MR 30 to MR 65
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.
SN6-90
Hydraulic-type grease nipple 90°
suitable for size BM 20*, BM 25*, BM 30*, BM 35, BM 45, MR 25*, MR 30 to MR 65
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.
SA6-RD
Lubrication adapter M8 round-head
suitable for size BM 20*, BM 25*, BM 30*, BM 35, BM 45, MR 25*, MR 30 to MR 65
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.