Plastic plugs
- Can be fitted manually with fairly simple tools
- Recommended for use with protected axes or in environments with low levels of contamination, e.g. handling
- Accessory MONORAIL MR
- Quantity supplied: Pack of 25 pcs
Brass plugs
- a hydraulic MWH fitting tool is Recommended for correct installation
- Accessory MONORAIL MR
Steel plugs
- two-part steel plugs suitable for applications with greater demands on the mechanical stability of rail surfaces, e.g. when mechanical loads are higher or in open chip spaces
- Combine the advantages of simple and Very Precise installation and a High degree of mechanical stability
- Accessory MONORAIL MR
Additional wiper Viton®
- Made of Viton® (fluoroelastomer)
- Suitable for use with aggressive coolants
- Retrofitting is possible without the need to remove the carriage from the rail
- Can be used in combination with ASM metal wipers
- Accessory MONORAIL MR
Metal wiper
- Used when large, loose particles of dirt on the guideway need to be removed
- The radial gap between the wiper and guideway is narrower than in the MR-4S front panel and is therefore designed in such a way that the particles cannot get stuck
- Effective when combined with additional ZCV wipers
- Accessory MONORAIL MR
Assembly rail
- Advise: Leave the assembly rail in the carriage to protect the balls against contamination
- The two internal carriage attaching screws can be fitted and tightened through the two holes in the assembly rail
- Accessory MONORAIL MR
Lubrication plate
- Long lubrication intervals of up to 5,000 km or 12 months according to use
- Refill apertures closed with screws
- Reduced outlay on lubrication and accessories
- Low environmental impact thanks to minimum consumption of lubricant
- Wipers have a long service life as oil is also supplied to the top surface of the rail
- The Lubrication plates have the same dimensions as the carriages front plates
- Used in dry and clean environments i.e. on the ancillary axes of machine tools
SN6
Hydraulic-type grease nipple straight
suitable for size BM 20*, BM 25*, BM 30*, BM 35, BM 45, MR 25*, MR 30 to MR 65
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.
SN6-45
Hydraulic-type grease nipple 45°
suitable for size BM 20*, BM 25*, BM 30*, BM 35, BM 45, MR 25*, MR 30 to MR 65
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.
SN6-T
Flush type grease nipple M6
suitable for size BM 20*, BM 25*, BM 30*, BM 35, BM 45, MR 25*, MR 30 to MR 65
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.
SN6-90
Hydraulic-type grease nipple 90°
suitable for size BM 20*, BM 25*, BM 30*, BM 35, BM 45, MR 25*, MR 30 to MR 65
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.
SA6-RD
Lubrication adapter M8 round-head
suitable for size BM 20*, BM 25*, BM 30*, BM 35, BM 45, MR 25*, MR 30 to MR 65
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.
SA6-6KT-M8x1
Lubrication adapter M8 hexagon head
suitable for size BM 20*, BM 25*, BM 30*, BM 35, BM 45, MR 25*, MR 30 to MR 65
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.
SA6-6KT-G1/8
Lubrication adapter G1/8 hexagon head
suitable for size BM 20*, BM 25*, BM 30*, BM 35, BM 45, MR 25*, MR 30 to MR 65
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.
SV6-M8
Swivel screw connection M8 (aluminum sealing)
suitable for size BM 20*, BM 25*, BM 30*, BM 35, BM 45, MR 25*, MR 30 to MR 65
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.
SV6-M6-L
Swivel screw connection M6 long (aluminum sealing)
suitable for size BM 20*, BM 25*, BM 30*, BM 35, BM 45, MR 25*, MR 30 to MR 65
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.
SV6-M8-L
Swivel screw connection M8 long (aluminum sealing)
suitable for size BM 20*, BM 25*, BM 30*, BM 35, BM 45, MR 25*, MR 30 to MR 65
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.
SV6-M6
Swivel screw connection M6 (aluminum sealing)
suitable for size BM 20*, BM 25*, BM 30*, BM 35, BM 45, MR 25*, MR 30 to MR 65
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.
SA6-D4-RD
Screw-in connection M6
suitable for size BM 20*, BM 25*, BM 30*, BM 35, BM 45, MR 25*, MR 30 to MR 65
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.
SV6-D4-SW9
Swivel screw connection for hose connection 4mm
suitable for size BM 20*, BM 25*, BM 30*, BM 35, BM 45, MR 25*, MR 30 to MR 65
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.
SV6-D4-SW10
Swivel screw connection for hose connection 4mm
suitable for size BM 20*, BM 25*, BM 30*, BM 35, BM 45, MR 25*, MR 30 to MR 65
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.
cross wiper
- double-lipped cross wipers are subject to natural abrasive wear
- must be checked regularly and replaced if necessary
- To do this, the front panel is loosened and removed from the front plate. The wiper can then be removed and replaced
- Accessory MONORAIL MR
