Plastic plugs
- Can be fitted manually with fairly simple tools
- Recommended for use with protected axes or in environments with low levels of contamination, e.g. handling
- Accessory MONORAIL BM
- Quantity supplied: Pack of 25 pcs
Additional wiper Viton®
- Made of Viton® (fluoroelastomer)
- Suitable for use with aggressive coolants
- Retrofitting is possible without any need to remove the carriage from the rail
- Can be used in combination with ABM metal wipers
- Accessory MONORAIL BM
Metal wiper
- Used to protect the sealing lips of carriages and additional wipers against hot Metal chips
- Large and loose dirt particles are pushed away
- Ideally Used in combination with ZBV additional wipers
- Accessory MONORAIL BM
Lubrication plate
- Long lubrication intervals of up to 5,000 km or 12 months according to use
- Refill apertures closed with screws
- Reduced outlay on lubrication and accessories
- Low environmental impact thanks to minimum consumption of lubricant
- Wipers have a long service life as oil is also supplied to the top surface of the rail
- The Lubrication plates have the same dimensions as the carriages front plates
- Used in dry and clean environments i.e. on the ancillary axes of machine tools
- Accessory MONORAIL BM
Assembly rail
- Advise: Leave the assembly rail in the carriage to protect the balls against contamination
- the two internal carriage attaching screws Can be fitted and tightened through the two holes in the assembly rail
- Accessory MONORAIL BM
SN3-T
Flush type grease nipple M3
suitable for size BM 15, BM 20*, BM 25*, BM 30* and MR 25*
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.
SA3-D3
Screw-in connection M3
suitable for size BM 15, BM 20*, BM 25*, BM 30* and MR 25*
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.
SV3-D3
Swivel screw connection for hose connection 3mm
suitable for size BM 15, BM 20*, BM 25*, BM 30* and MR 25*
*different thread diameters available depending on the lubrication connection. Please refer to the drawing on our product detail page for the carriages.